Korea Fire Institute of Industry & Technology
  • product Products List
    • home Home >
    • Pdoduct >
    • Products List
  • list image

  • Alarm Bell
    *Model : CSA-PR-10W *Type : Window Type, Relay Type *Rated Voltage : AC220V/60Hz *Available Temperature for Use : -10℃∼50℃ *Circuit Acceptance Capacity : 5 circuits *Spare Power Source : DC 24V 1,300mAh *Outer Box :
    go to inquiry
  • list image

  • PRE-ACTION VALVES
    * SIZE : 80A~150A 1. WORKING PRESSURE : 0.2MPa~1.4MPa 2. APPLICATION FLUID : WATER 3. HYDRAULIC TEST : 2.2 MPa 4. END CONNECTING : KS B 1511 10K FF FLANGED 5. ADHESION DIRECTION : VERTICAL 6.OPERATING TYPE : LATCHED CLAPPER SWING 7. ALARM SWITCH : PRESSURE SENSING(DC24V) 8. PILOT VALVE : MOV(OPEN TYPE DC24V) 9. MATERIALS : BODY GCD450, TRIM SSC13/C3771/EPDM
    go to inquiry
  • list image

  • ALARM VALVES
    * SIZE : 65A~150A 1. WORKING PRESSURE : 0.2MPa~1.4MPa 2. APPLICATION FLUID : WATER 3. HYDRAULIC TEST : 2.2 MPa 4. END CONNECTING : GROOVE JOINT 5. ADHESION DIRECTION : VERTICAL 6. FLOW INTEGER : 80 7. PRESSURE LOSS : MAX 20.7kPa 8. ALARM SWITCH : DELAY TIME 3~5sec M SENSING TYPE APPROACH SENSOR 9. MATERIALS : BODY GCD450, TRIM SSC13/C3771
    go to inquiry
  • list image

  • ALARM VALVES
    * SIZE : 65A~150A 1. WORKING PRESSURE : 0.2MPa~1.4MPa 2. APPLICATION FLUID : WATER 3. HYDRAULIC TEST : 2.2 MPa 4. END CONNECTING : KS 10K FF FLANGED 5. ADHESION DIRECTION : VERTICAL 6. FLOW INTEGER : 80 7. PRESSURE LOSS : MAX 20.7kPa 8. ALARM SWITCH : DELAY TIME 3~5sec M SENSING TYPE APPROACH SENSOR 9. MATERIALS : BODY GCD450, TRIM SSC13/C3771
    go to inquiry
  • list image

  • ALARM BELL
    * MODEL NO. : HE2002 * KFEIC APPROVAL LISTING NO. : KYUNG11-11 * RATED VOLTAGE : DC 24V(±20) * CONTACT RATING CURRENT : 50mA * AMBIENT CONDITION : -10℃ TO 50℃, MAX. 85RH * DIMENSION : ¢90mm x 48mm * WEIGHT : APPROX 450g
    go to inquiry
  • list image

  • Alarm Bell
    *Approval No. : Kyung 97-12-1 / Kyung 08-1 *Rated Voltage : DC 24V, ±20 (Work at 80 of rated voltage) *Sound alarm range : less than 25m *No. of devices per circuit : less than 50 units *Weight : 297g *Ambient Condition : -20℃ ~ 70℃, 85RH *Sound output Over 90phone/m at 1m dist
    go to inquiry
  • list image

  • Falmeproof Horn Signals
    *Materials -Main Body : Die-cast aluminium alloy -Terminal Box : Die-cast aluminium alloy *Specification -Rated Voltage : 24V -Frequency : 50/60Hz -Approximate Wattage : 20W -Sound Level (at 1m) : 97dB or more -Time Rating : 15 minute
    go to inquiry
  • go list